нужна помощь Как Подключитца К Серверу L2Ps_Server

[DeG 1]

проблема такова скачал исходники ссылка на них: http://forummaxi.ru/...jps-hf5-source/ L2PS_Server склипал сборку а зайти на неё не могу вот скрины логов

 

 

 

Может ктонить поможет найти где тут авторегу выставить.

Изменено 23 июня, 2014 пользователем DeG

[DeG 1]

в конфигах искал фиг нашол помогите если несложно

[Warmen 126]

в патче l2.ini проверь ip

[Alex9456 10]

конфиги подключения логин и гейм сервера сюда

[Energy 263]

Проверяйте конфиги, если не подключается то проблема или в них или в л2.ини

 

оффтоп: Подключите к себе русский язык сначала

[Alex9456 10]

P.S оффтоп опять будет в тему=)

 

Изменено 23 июня, 2014 пользователем Alex9456

[DeG 1]

я отредактировал l2.ini под localhost

поставил ип 127.0.0.1

 

а зайти не могу причина в том что реги нету та

[DeG 1]

конфиг гейм сервера

 

---------------------------------------------------------------------------
# Game Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
# Where's the Login server this gameserver should connect to
# WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u>
# WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u>
# Default: 127.0.0.1
LoginHost = 127.0.0.1
# TCP port the login server listen to for gameserver connection requests
# Default: 9014
LoginPort = 9014
# Bind address for gameserver. You should not need to change it in most cases.
# WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u>
# WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u>
# Default: * (0.0.0.0)
GameserverHostname = *
# Default: 7777
GameserverPort = 7777

# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver
# Database URL
# URL = jdbc:mysql://localhost/l2ps (default)
# URL = jdbc:hsqldb:hsql://localhost/l2ps
# URL = jdbc:sqlserver://localhost/database = l2ps/user = root/password = 123456
URL = jdbc:mysql://localhost/l2ps
# Database user info (default is "root" but it's not recommended)
Login = root
# Database connection password
Password = 123456
# Default: 100
MaximumDbConnections = 100
# Default: 0
MaximumDbIdleTime = 0
# ---------------------------------------------------------------------------
# Misc Server Settings
# ---------------------------------------------------------------------------
# This is the server ID that the Game Server will request.
# Example: 1 = Bartz
# Default: 1
RequestServerID = 1
# True = The Login Server will give an other ID to the server if the requested ID is already reserved.
# Default: True
AcceptAlternateID = True
# Datapack root directory.
# Defaults to current directory from which the server is started unless the below line is uncommented.
# WARNING: <u><b><font color="red">If the specified path is invalid, it will lead to multiple errors!</font></b></u>
#Default: .
DatapackRoot = .
# Define how many players are allowed to play simultaneously on your server.
# Default: 100
MaximumOnlineUsers = 100
# Numbers of protocol revisions that server allows to connect.
# Delimiter is ;
# WARNING: <u><b><font color="red">Changing the protocol revision may result in incompatible communication and many errors in game!</font></b></u>
# Default: 267;268;271;273
AllowedProtocolRevisions = 267;268;271;273

# ---------------------------------------------------------------------------
# Misc Player Settings
# ---------------------------------------------------------------------------
# Character name template.
# Examples:
# CnameTemplate = [A-Z][a-z]{3,3}[A-Za-z0-9]*
# The above setting will allow names with first capital letter, next three small letters,
# and any letter (case insensitive) or number, like OmfgWTF1
# CnameTemplate = [A-Z][a-z]*
# The above setting will allow names only of letters with first one capital, like Omfgwtf
# Default .* (allows any symbol)
CnameTemplate = .*
# This setting restricts names players can give to their pets.
# See CnameTemplate for details
PetNameTemplate = .*
# This setting restricts clan/subpledge names players can set.
# See CnameTemplate for details
ClanNameTemplate = .*
# Maximum number of characters per account.
# Default: 7 (client limit)
CharMaxNumber = 7

[DeG 1]

Конфиг логин сервера

 

# ---------------------------------------------------------------------------
# Login Server Settings
# ---------------------------------------------------------------------------
# This is the server configuration file. Here you can set up the connection information for your server.
# This was written with the assumption that you are behind a router.
# Dumbed Down Definitions...
# LAN (LOCAL area network) - typically consists of computers connected to the same router as you.
# WAN (WIDE area network) - typically consists of computers OUTSIDE of your router (ie. the internet).
# x.x.x.x - Format of an IP address. Do not include the x'es into settings. Must be real numbers.
# ---------------------------------------------------------------------------
# Networking
# ---------------------------------------------------------------------------
# Bind ip of the LoginServer, use * to bind on all available IPs
# WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u>
# WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u>
# Default: * (0.0.0.0)
LoginserverHostname = *
# Default: 2106
LoginserverPort = 2106
# The address on which login will listen for GameServers, use * to bind on all available IPs
# WARNING: <u><b><font color="red">Please don't change default IPs here if you don't know what are you doing!</font></b></u>
# WARNING: <u><b><font color="red">External/Internal IPs are now inside "ipconfig.xml" file.</font></b></u>
# Default: 127.0.0.1
LoginHostname = 127.0.0.1
# The port on which login will listen for GameServers
# Default: 9014
LoginPort = 9014
# ---------------------------------------------------------------------------
# Security
# ---------------------------------------------------------------------------
# Logs in file the login server events.
# Default: True
LogLoginController = True
# How many times you can provide an invalid account/pass before the IP gets banned.
# Default: 5
LoginTryBeforeBan = 5
# Time you won't be able to login back again after LoginTryBeforeBan tries to login.
# Default: 900 (15 minutes)
LoginBlockAfterBan = 900
# If set to True any GameServer can register on your login's free slots
# Default: True
AcceptNewGameServer = True
# Flood Protection. All values are in MILISECONDS.
# Default: True
EnableFloodProtection = True
# Default: 15
FastConnectionLimit = 15
# Default: 700
NormalConnectionTime = 700
# Default: 350
FastConnectionTime = 350
# Default: 50
MaxConnectionPerIP = 50
# ---------------------------------------------------------------------------
# Database
# ---------------------------------------------------------------------------
# Specify the appropriate driver and url for the database you're using.
# Examples:
# Driver = com.mysql.jdbc.Driver (default)
# Driver = org.hsqldb.jdbcDriver
# Driver = com.microsoft.sqlserver.jdbc.SQLServerDriver
Driver = com.mysql.jdbc.Driver
# Database URL
# URL = jdbc:mysql://localhost/l2ps (default)
# URL = jdbc:hsqldb:hsql://localhost/l2ps
# URL = jdbc:sqlserver://localhost/database = l2ps/user = root/password = 123456
URL = jdbc:mysql://localhost/l2ps
# Database user info (default is "root" but it's not recommended)
Login = root
# Database connection password
Password = 123456
# Default: 10
MaximumDbConnections = 10
# Default: 0
MaximumDbIdleTime = 0
# ---------------------------------------------------------------------------
# Misc.
# ---------------------------------------------------------------------------
# If False, the license (after the login) will not be shown.
# Default: True
ShowLicence = True
# Default: True
AutoCreateAccounts = True
# Datapack root directory.
# Defaults to current directory from which the server is started.
DatapackRoot = .
# ---------------------------------------------------------------------------
# Developer Settings
# ---------------------------------------------------------------------------
# Default: False
Debug = False
# ---------------------------------------------------------------------------
# Restart LS every 24 hours?
# ---------------------------------------------------------------------------
# Enable disable scheduled login restart.
# Default: False
LoginRestartSchedule = False
# Time in hours.
# Default: 24
LoginRestartTime = 24

[DeG 1]

и где тут авторегу поставить?

[Industrial 13]

# Default: True

AutoCreateAccounts = True

[DeG 1]

# Default: True

AutoCreateAccounts = True

 

и где ты это нашел?