Проблема с базой lucera 1.7

[KAZAR 178]

в общем такая проблема. Запускаю на дцшке сборку люцера 1.7 

люди заходят от 5-10 человек.... в течении 10-20 минут база падает . логин продолжает работать а батник гейма начинает выбивать много ошибок вот такого рода https://yadi.sk/i/6glR5cabmJfGA

Подскажите пожалуйста буду очень благодарен 

дц windows server 2003

Изменено 20 декабря, 2015 пользователем KAZAR

[Energy 263]

что за версия MySQL стоит? и какая OC

Изменено 19 декабря, 2015 пользователем Energy

[KAZAR 178]

что за версия MySQL стоит? и какая OC

5.5 windows server 2003

[Energy 263]

5.5 windows server 2003

была такая проблема на 5.5, поставил 5.1 и увеличил количество коннектов и все ок стало

[KAZAR 178]

была такая проблема на 5.5, поставил 5.1 и увеличил количество коннектов и все ок стало

хм как то глупо но попробую

[KAZAR 178]

была такая проблема на 5.5, поставил 5.1 и увеличил количество коннектов и все ок стало

ыы бывает что такие глупые и простые вещи.... а оказывается ты был прав

[KAZAR 178]

была такая проблема на 5.5, поставил 5.1 и увеличил количество коннектов и все ок стало

хотя гейм серв стал дольше работать... но все равно утром проснулся.. та же беда да и логов на собиралось на 5 гб

[KAZAR 178]

актуально , помогите пж... Исходники есть

[Xeliken 142]

max_connection сколько указано в конфиге мускуля?

[KAZAR 178]

max_connection сколько указано в конфиге мускуля?

стояло 100 поставил 5к

[KAZAR 178]

max_connection сколько указано в конфиге мускуля?

поставил 5к и та же беда

[california 155]

поставил 5к и та же беда

my.cnf - тут что у вас?

[KAZAR 178]

my.cnf - тут что у вас?

# MySQL Server Instance Configuration File

# ----------------------------------------------------------------------

# Generated by the MySQL Server Instance Configuration Wizard

#

#

# Installation Instructions

# ----------------------------------------------------------------------

#

# On Linux you can copy this file to /etc/my.cnf to set global options,

# mysql-data-dir/my.cnf to set server-specific options

# (@localstatedir@ for this installation) or to

# ~/.my.cnf to set user-specific options.

#

# On Windows you should keep this file in the installation directory

# of your server (e.g. C:\Program Files\MySQL\MySQL Server X.Y). To

# make sure the server reads the config file use the startup option

# "--defaults-file".

#

# To run run the server from the command line, execute this in a

# command line shell, e.g.

# mysqld --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"

#

# To install the server as a Windows service manually, execute this in a

# command line shell, e.g.

# mysqld --install MySQLXY --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"

#

# And then execute this in a command line shell to start the server, e.g.

# net start MySQLXY

#

#

# Guildlines for editing this file

# ----------------------------------------------------------------------

#

# In this file, you can use all long options that the program supports.

# If you want to know the options a program supports, start the program

# with the "--help" option.

#

# More detailed information about the individual options can also be

# found in the manual.

#

#

# CLIENT SECTION

# ----------------------------------------------------------------------

#

# The following options will be read by MySQL client applications.

# Note that only client applications shipped by MySQL are guaranteed

# to read this section. If you want your own MySQL client program to

# honor these values, you need to specify it as an option during the

# MySQL client library initialization.

#

[client]

port=3306

[mysql]

default-character-set=latin1

# SERVER SECTION

# ----------------------------------------------------------------------

#

# The following options will be read by the MySQL Server. Make sure that

# you have installed the server correctly (see above) so it reads this

# file.

#

[mysqld]

# The TCP/IP Port the MySQL Server will listen on

port=3306

#Path to installation directory. All paths are usually resolved relative to this.

basedir="C:/Program Files/MySQL/MySQL Server 5.1/"

#Path to the database root

datadir="C:/Documents and Settings/All Users/Application Data/MySQL/MySQL Server 5.1/Data/"

# The default character set that will be used when a new schema or table is

# created and no character set is defined

default-character-set=latin1

# The default storage engine that will be used when create new tables when

default-storage-engine=INNODB

# Set the SQL mode to strict

sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"

# The maximum amount of concurrent sessions the MySQL server will

# allow. One of these connections will be reserved for a user with

# SUPER privileges to allow the administrator to login even if the

# connection limit has been reached.

max_connections=5000

# Query cache is used to cache SELECT results and later return them

# without actual executing the same query once again. Having the query

# cache enabled may result in significant speed improvements, if your

# have a lot of identical queries and rarely changing tables. See the

# "Qcache_lowmem_prunes" status variable to check if the current value

# is high enough for your load.

# Note: In case your tables change very often or if your queries are

# textually different every time, the query cache may result in a

# slowdown instead of a performance improvement.

query_cache_size=0

# The number of open tables for all threads. Increasing this value

# increases the number of file descriptors that mysqld requires.

# Therefore you have to make sure to set the amount of open files

# allowed to at least 4096 in the variable "open-files-limit" in

# section [mysqld_safe]

table_cache=256

# Maximum size for internal (in-memory) temporary tables. If a table

# grows larger than this value, it is automatically converted to disk

# based table This limitation is for a single table. There can be many

# of them.

tmp_table_size=35M

# How many threads we should keep in a cache for reuse. When a client

# disconnects, the client's threads are put in the cache if there aren't

# more than thread_cache_size threads from before.  This greatly reduces

# the amount of thread creations needed if you have a lot of new

# connections. (Normally this doesn't give a notable performance

# improvement if you have a good thread implementation.)

thread_cache_size=8

#*** MyISAM Specific options

# The maximum size of the temporary file MySQL is allowed to use while

# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.

# If the file-size would be bigger than this, the index will be created

# through the key cache (which is slower).

myisam_max_sort_file_size=100G

# If the temporary file used for fast index creation would be bigger

# than using the key cache by the amount specified here, then prefer the

# key cache method.  This is mainly used to force long character keys in

# large tables to use the slower key cache method to create the index.

myisam_sort_buffer_size=69M

# Size of the Key Buffer, used to cache index blocks for MyISAM tables.

# Do not set it larger than 30% of your available memory, as some memory

# is also required by the OS to cache rows. Even if you're not using

# MyISAM tables, you should still set it to 8-64M as it will also be

# used for internal temporary disk tables.

key_buffer_size=55M

# Size of the buffer used for doing full table scans of MyISAM tables.

# Allocated per thread, if a full scan is needed.

read_buffer_size=64K

read_rnd_buffer_size=256K

# This buffer is allocated when MySQL needs to rebuild the index in

# REPAIR, OPTIMZE, ALTER table statements as well as in LOAD DATA INFILE

# into an empty table. It is allocated per thread so be careful with

# large settings.

sort_buffer_size=256K

#*** INNODB Specific options ***

# Use this option if you have a MySQL server with InnoDB support enabled

# but you do not plan to use it. This will save memory and disk space

# and speed up some things.

#skip-innodb

# Additional memory pool that is used by InnoDB to store metadata

# information.  If InnoDB requires more memory for this purpose it will

# start to allocate it from the OS.  As this is fast enough on most

# recent operating systems, you normally do not need to change this

# value. SHOW INNODB STATUS will display the current amount used.

innodb_additional_mem_pool_size=3M

# If set to 1, InnoDB will flush (fsync) the transaction logs to the

# disk at each commit, which offers full ACID behavior. If you are

# willing to compromise this safety, and you are running small

# transactions, you may set this to 0 or 2 to reduce disk I/O to the

# logs. Value 0 means that the log is only written to the log file and

# the log file flushed to disk approximately once per second. Value 2

# means the log is written to the log file at each commit, but the log

# file is only flushed to disk approximately once per second.

innodb_flush_log_at_trx_commit=1

# The size of the buffer InnoDB uses for buffering log data. As soon as

# it is full, InnoDB will have to flush it to disk. As it is flushed

# once per second anyway, it does not make sense to have it very large

# (even with long transactions).

innodb_log_buffer_size=2M

# InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and

# row data. The bigger you set this the less disk I/O is needed to

# access data in tables. On a dedicated database server you may set this

# parameter up to 80% of the machine physical memory size. Do not set it

# too large, though, because competition of the physical memory may

# cause paging in the operating system.  Note that on 32bit systems you

# might be limited to 2-3.5G of user level memory per process, so do not

# set it too high.

innodb_buffer_pool_size=107M

# Size of each log file in a log group. You should set the combined size

# of log files to about 25%-100% of your buffer pool size to avoid

# unneeded buffer pool flush activity on log file overwrite. However,

# note that a larger logfile size will increase the time needed for the

# recovery process.

innodb_log_file_size=54M

# Number of threads allowed inside the InnoDB kernel. The optimal value

# depends highly on the application, hardware as well as the OS

# scheduler properties. A too high value may lead to thread thrashing.

innodb_thread_concurrency=10

[KJIyHu 100]

Зачем на виндовс люсю ставить?

[Xeliken 142]

# MySQL Server Instance Configuration File

# ----------------------------------------------------------------------

# Generated by the MySQL Server Instance Configuration Wizard

#

#

# Installation Instructions

# ----------------------------------------------------------------------

#

# On Linux you can copy this file to /etc/my.cnf to set global options,

# mysql-data-dir/my.cnf to set server-specific options

# (@localstatedir@ for this installation) or to

# ~/.my.cnf to set user-specific options.

#

# On Windows you should keep this file in the installation directory

# of your server (e.g. C:\Program Files\MySQL\MySQL Server X.Y). To

# make sure the server reads the config file use the startup option

# "--defaults-file".

#

# To run run the server from the command line, execute this in a

# command line shell, e.g.

# mysqld --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"

#

# To install the server as a Windows service manually, execute this in a

# command line shell, e.g.

# mysqld --install MySQLXY --defaults-file="C:\Program Files\MySQL\MySQL Server X.Y\my.ini"

#

# And then execute this in a command line shell to start the server, e.g.

# net start MySQLXY

#

#

# Guildlines for editing this file

# ----------------------------------------------------------------------

#

# In this file, you can use all long options that the program supports.

# If you want to know the options a program supports, start the program

# with the "--help" option.

#

# More detailed information about the individual options can also be

# found in the manual.

#

#

# CLIENT SECTION

# ----------------------------------------------------------------------

#

# The following options will be read by MySQL client applications.

# Note that only client applications shipped by MySQL are guaranteed

# to read this section. If you want your own MySQL client program to

# honor these values, you need to specify it as an option during the

# MySQL client library initialization.

#

[client]

port=3306

[mysql]

default-character-set=latin1

# SERVER SECTION

# ----------------------------------------------------------------------

#

# The following options will be read by the MySQL Server. Make sure that

# you have installed the server correctly (see above) so it reads this

# file.

#

[mysqld]

# The TCP/IP Port the MySQL Server will listen on

port=3306

#Path to installation directory. All paths are usually resolved relative to this.

basedir="C:/Program Files/MySQL/MySQL Server 5.1/"

#Path to the database root

datadir="C:/Documents and Settings/All Users/Application Data/MySQL/MySQL Server 5.1/Data/"

# The default character set that will be used when a new schema or table is

# created and no character set is defined

default-character-set=latin1

# The default storage engine that will be used when create new tables when

default-storage-engine=INNODB

# Set the SQL mode to strict

sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"

# The maximum amount of concurrent sessions the MySQL server will

# allow. One of these connections will be reserved for a user with

# SUPER privileges to allow the administrator to login even if the

# connection limit has been reached.

max_connections=5000

# Query cache is used to cache SELECT results and later return them

# without actual executing the same query once again. Having the query

# cache enabled may result in significant speed improvements, if your

# have a lot of identical queries and rarely changing tables. See the

# "Qcache_lowmem_prunes" status variable to check if the current value

# is high enough for your load.

# Note: In case your tables change very often or if your queries are

# textually different every time, the query cache may result in a

# slowdown instead of a performance improvement.

query_cache_size=0

# The number of open tables for all threads. Increasing this value

# increases the number of file descriptors that mysqld requires.

# Therefore you have to make sure to set the amount of open files

# allowed to at least 4096 in the variable "open-files-limit" in

# section [mysqld_safe]

table_cache=256

# Maximum size for internal (in-memory) temporary tables. If a table

# grows larger than this value, it is automatically converted to disk

# based table This limitation is for a single table. There can be many

# of them.

tmp_table_size=35M

# How many threads we should keep in a cache for reuse. When a client

# disconnects, the client's threads are put in the cache if there aren't

# more than thread_cache_size threads from before.  This greatly reduces

# the amount of thread creations needed if you have a lot of new

# connections. (Normally this doesn't give a notable performance

# improvement if you have a good thread implementation.)

thread_cache_size=8

#*** MyISAM Specific options

# The maximum size of the temporary file MySQL is allowed to use while

# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.

# If the file-size would be bigger than this, the index will be created

# through the key cache (which is slower).

myisam_max_sort_file_size=100G

# If the temporary file used for fast index creation would be bigger

# than using the key cache by the amount specified here, then prefer the

# key cache method.  This is mainly used to force long character keys in

# large tables to use the slower key cache method to create the index.

myisam_sort_buffer_size=69M

# Size of the Key Buffer, used to cache index blocks for MyISAM tables.

# Do not set it larger than 30% of your available memory, as some memory

# is also required by the OS to cache rows. Even if you're not using

# MyISAM tables, you should still set it to 8-64M as it will also be

# used for internal temporary disk tables.

key_buffer_size=55M

# Size of the buffer used for doing full table scans of MyISAM tables.

# Allocated per thread, if a full scan is needed.

read_buffer_size=64K

read_rnd_buffer_size=256K

# This buffer is allocated when MySQL needs to rebuild the index in

# REPAIR, OPTIMZE, ALTER table statements as well as in LOAD DATA INFILE

# into an empty table. It is allocated per thread so be careful with

# large settings.

sort_buffer_size=256K

#*** INNODB Specific options ***

# Use this option if you have a MySQL server with InnoDB support enabled

# but you do not plan to use it. This will save memory and disk space

# and speed up some things.

#skip-innodb

# Additional memory pool that is used by InnoDB to store metadata

# information.  If InnoDB requires more memory for this purpose it will

# start to allocate it from the OS.  As this is fast enough on most

# recent operating systems, you normally do not need to change this

# value. SHOW INNODB STATUS will display the current amount used.

innodb_additional_mem_pool_size=3M

# If set to 1, InnoDB will flush (fsync) the transaction logs to the

# disk at each commit, which offers full ACID behavior. If you are

# willing to compromise this safety, and you are running small

# transactions, you may set this to 0 or 2 to reduce disk I/O to the

# logs. Value 0 means that the log is only written to the log file and

# the log file flushed to disk approximately once per second. Value 2

# means the log is written to the log file at each commit, but the log

# file is only flushed to disk approximately once per second.

innodb_flush_log_at_trx_commit=1

# The size of the buffer InnoDB uses for buffering log data. As soon as

# it is full, InnoDB will have to flush it to disk. As it is flushed

# once per second anyway, it does not make sense to have it very large

# (even with long transactions).

innodb_log_buffer_size=2M

# InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and

# row data. The bigger you set this the less disk I/O is needed to

# access data in tables. On a dedicated database server you may set this

# parameter up to 80% of the machine physical memory size. Do not set it

# too large, though, because competition of the physical memory may

# cause paging in the operating system.  Note that on 32bit systems you

# might be limited to 2-3.5G of user level memory per process, so do not

# set it too high.

innodb_buffer_pool_size=107M

# Size of each log file in a log group. You should set the combined size

# of log files to about 25%-100% of your buffer pool size to avoid

# unneeded buffer pool flush activity on log file overwrite. However,

# note that a larger logfile size will increase the time needed for the

# recovery process.

innodb_log_file_size=54M

# Number of threads allowed inside the InnoDB kernel. The optimal value

# depends highly on the application, hardware as well as the OS

# scheduler properties. A too high value may lead to thread thrashing.

innodb_thread_concurrency=10

 

Попробуйте этот конфиг:

# /etc/mysql/my.cnf: The global mysql configuration file.

# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-4.1,v 1.4 2008/11/14 02:16:25 robbat2 Exp $

 

# The following options will be passed to all MySQL clients

[client]

#password = your_password

port = 3306

socket = /var/run/mysqld/mysqld.sock

 

# use [safe_mysqld] with mysql-3

[mysqld_safe]

err-log = /var/log/mysql/mysql.err

 

# add a section [mysqld-4.1] or [mysqld-5.0] for specific configurations

[mysqld]

user = mysql

port = 3306

socket = /var/run/mysqld/mysqld.sock

pid-file = /var/run/mysqld/mysqld.pid

log-error = /var/log/mysql/mysqld.err

slow_query_log

basedir = /usr

datadir = /var/lib/mysql

skip-external-locking

key_buffer = 384M

max_allowed_packet = 16M

table_cache = 512

sort_buffer_size = 2M

net_buffer_length = 16K

read_buffer_size = 512K

read_rnd_buffer_size = 768K

myisam_sort_buffer_size = 64M

thread_cache_size = 30

query_cache_size = 16M

thread_concurrency = 12

 

language = /usr/share/mysql/english

default-storage-engine = MyISAM

 

sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"

 

max_connections = 1000

tmp_table_size = 256M

myisam_max_sort_file_size=100G

key_buffer_size = 512M

 

# security:

# using "localhost" in connects uses sockets by default

# skip-

bind-address = 0.0.0.0

 

#log-bin

 

# point the following paths to different dedicated disks

tmpdir = /tmp/

#log-update = /path-to-dedicated-directory/hostname

 

# you need the debug USE flag enabled to use the following directives,

# if needed, uncomment them, start the server and issue

# #tail -f /tmp/mysqld.sql /tmp/mysqld.trace

# this will show you *exactly* what's happening in your server

 

#log = /tmp/mysqld.sql

#gdb

#debug = d:t:i:o,/tmp/mysqld.trace

#one-thread

 

# uncomment the following directives if you are using BDB tables

#bdb_cache_size = 4M

#bdb_max_lock = 10000

 

# the following is the InnoDB configuration

# if you wish to disable innodb instead

# uncomment just the next line

#skip-innodb

#

# the rest of the innodb config follows:

# don't eat too much memory, we're trying to be safe on 64Mb boxes

# you might want to bump this up a bit on boxes with more RAM

innodb_buffer_pool_size = 1G

# this is the default, increase it if you have lots of tables

innodb_additional_mem_pool_size = 20M

#

# i'd like to use /var/lib/mysql/innodb, but that is seen as a database :-(

# and upstream wants things to be under /var/lib/mysql/, so that's the route

# we have to take for the moment

#innodb_data_home_dir = /var/lib/mysql/

#innodb_log_arch_dir = /var/lib/mysql/

#innodb_log_group_home_dir = /var/lib/mysql/

# you may wish to change this size to be more suitable for your system

# the max is there to avoid run-away growth on your machine

#innodb_data_file_path = ibdata1:10M:autoextend:max:2048M

# we keep this at around 25% of of innodb_buffer_pool_size

# sensible values range from 1MB to (1/innodb_log_files_in_group*innodb_buffer_pool_size)

innodb_log_file_size = 512M

# this is the default, increase it if you have very large transactions going on

innodb_log_buffer_size = 6M

# this is the default and won't hurt you

# you shouldn't need to tweak it

#set-variable = innodb_log_files_in_group=2

# see the innodb config docs, the other options are not always safe

innodb_flush_log_at_trx_commit = 2

#innodb_lock_wait_timeout = 50

#innodb_file_per_table

#innodb_flush_method O_DIRECT

 

innodb_thread_concurrency=12

 

join_buffer_size = 256K

memlock

max_heap_table_size = 196M

bulk_insert_buffer_size = 32M

query_cache_limit = 128K

long_query_time = 8

log-slow-queries

slow_query_log_file = /var/log/mysql/slowquery.err

log-warnings = 1

secure-auth

max_connect_errors = 10000

skip-host-cache

skip-name-resolve

 

[mysqldump]

quick

max_allowed_packet = 16M

 

[mysql]

# uncomment the next directive if you are not familiar with SQL

#safe-updates

 

[isamchk]

key_buffer = 256M

sort_buffer_size = 256M

read_buffer = 2M

write_buffer = 2M

 

[myisamchk]

key_buffer = 256M

sort_buffer_size = 256M

read_buffer = 2M

write_buffer = 2M

 

[mysqlhotcopy]

interactive-timeout

 

 

[KAZAR 178]

Попробуйте этот конфиг:

# /etc/mysql/my.cnf: The global mysql configuration file.

# $Header: /var/cvsroot/gentoo-x86/dev-db/mysql/files/my.cnf-4.1,v 1.4 2008/11/14 02:16:25 robbat2 Exp $

 

# The following options will be passed to all MySQL clients

[client]

#password = your_password

port = 3306

socket = /var/run/mysqld/mysqld.sock

 

# use [safe_mysqld] with mysql-3

[mysqld_safe]

err-log = /var/log/mysql/mysql.err

 

# add a section [mysqld-4.1] or [mysqld-5.0] for specific configurations

[mysqld]

user = mysql

port = 3306

socket = /var/run/mysqld/mysqld.sock

pid-file = /var/run/mysqld/mysqld.pid

log-error = /var/log/mysql/mysqld.err

slow_query_log

basedir = /usr

datadir = /var/lib/mysql

skip-external-locking

key_buffer = 384M

max_allowed_packet = 16M

table_cache = 512

sort_buffer_size = 2M

net_buffer_length = 16K

read_buffer_size = 512K

read_rnd_buffer_size = 768K

myisam_sort_buffer_size = 64M

thread_cache_size = 30

query_cache_size = 16M

thread_concurrency = 12

 

language = /usr/share/mysql/english

default-storage-engine = MyISAM

 

sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"

 

max_connections = 1000

tmp_table_size = 256M

myisam_max_sort_file_size=100G

key_buffer_size = 512M

 

# security:

# using "localhost" in connects uses sockets by default

# skip-

bind-address = 0.0.0.0

 

#log-bin

 

# point the following paths to different dedicated disks

tmpdir = /tmp/

#log-update = /path-to-dedicated-directory/hostname

 

# you need the debug USE flag enabled to use the following directives,

# if needed, uncomment them, start the server and issue

# #tail -f /tmp/mysqld.sql /tmp/mysqld.trace

# this will show you *exactly* what's happening in your server

 

#log = /tmp/mysqld.sql

#gdb

#debug = d:t:i:o,/tmp/mysqld.trace

#one-thread

 

# uncomment the following directives if you are using BDB tables

#bdb_cache_size = 4M

#bdb_max_lock = 10000

 

# the following is the InnoDB configuration

# if you wish to disable innodb instead

# uncomment just the next line

#skip-innodb

#

# the rest of the innodb config follows:

# don't eat too much memory, we're trying to be safe on 64Mb boxes

# you might want to bump this up a bit on boxes with more RAM

innodb_buffer_pool_size = 1G

# this is the default, increase it if you have lots of tables

innodb_additional_mem_pool_size = 20M

#

# i'd like to use /var/lib/mysql/innodb, but that is seen as a database :-(

# and upstream wants things to be under /var/lib/mysql/, so that's the route

# we have to take for the moment

#innodb_data_home_dir = /var/lib/mysql/

#innodb_log_arch_dir = /var/lib/mysql/

#innodb_log_group_home_dir = /var/lib/mysql/

# you may wish to change this size to be more suitable for your system

# the max is there to avoid run-away growth on your machine

#innodb_data_file_path = ibdata1:10M:autoextend:max:2048M

# we keep this at around 25% of of innodb_buffer_pool_size

# sensible values range from 1MB to (1/innodb_log_files_in_group*innodb_buffer_pool_size)

innodb_log_file_size = 512M

# this is the default, increase it if you have very large transactions going on

innodb_log_buffer_size = 6M

# this is the default and won't hurt you

# you shouldn't need to tweak it

#set-variable = innodb_log_files_in_group=2

# see the innodb config docs, the other options are not always safe

innodb_flush_log_at_trx_commit = 2

#innodb_lock_wait_timeout = 50

#innodb_file_per_table

#innodb_flush_method O_DIRECT

 

innodb_thread_concurrency=12

 

join_buffer_size = 256K

memlock

max_heap_table_size = 196M

bulk_insert_buffer_size = 32M

query_cache_limit = 128K

long_query_time = 8

log-slow-queries

slow_query_log_file = /var/log/mysql/slowquery.err

log-warnings = 1

secure-auth

max_connect_errors = 10000

skip-host-cache

skip-name-resolve

 

[mysqldump]

quick

max_allowed_packet = 16M

 

[mysql]

# uncomment the next directive if you are not familiar with SQL

#safe-updates

 

[isamchk]

key_buffer = 256M

sort_buffer_size = 256M

read_buffer = 2M

write_buffer = 2M

 

[myisamchk]

key_buffer = 256M

sort_buffer_size = 256M

read_buffer = 2M

write_buffer = 2M

 

[mysqlhotcopy]

interactive-timeout

 

 

он же другой. что толку

[KAZAR 178]

ап

[Xeliken 142]

А блин, у тебя винда

Этот конфиг стоит на дебиане и держит онлайн 2к+

[california 155]

my-medium.ini - нужно будет переименовать в my.ini - на сколько я помню.

max_allowed_packet = 128M - можно так, можно и более.

Да на nix совсем другие надстройки.

Изменено 20 декабря, 2015 пользователем california

[KJIyHu 100]

А блин, у тебя винда

Этот конфиг стоит на дебиане и держит онлайн 2к+

Вот именно, надо ставить на дебиане и проблема уйдет сама собой, зачем ваще с виндой связываться когда дебиан быстрее работает и проще в управлении, плюс iptables как дополнительная защита от ддос, не говоря уже про порт базы который на винде открыт.

[california 155]

Вот именно, надо ставить на дебиане и проблема уйдет сама собой, зачем ваще с виндой связываться когда дебиан быстрее работает и проще в управлении, плюс iptables как дополнительная защита от ддос, не говоря уже про порт базы который на винде открыт.

Ну я тоже настоятельно рекомендую unix системы, но человек задал вопрос по win.

Это уже ему наверно решать, какой осью ему пользоваться.

[KJIyHu 100]

Ну я тоже настоятельно рекомендую unix системы, но человек задал вопрос по win.

Это уже ему наверно решать, какой осью ему пользоваться.

Я понимаю не первый день на форуме, но просто может это решение данной проблемы...

 

 

Просто мало того что винда так еще и 2003, еще бы виндовс xp поставил, если и работать то уже с 2012, но в любом случае это куча проблем и преимущества дебиана налицо)))

Изменено 20 декабря, 2015 пользователем KJIyHu

[california 155]

Я понимаю не первый день на форуме, но просто может это решение данной проблемы...

 

 

Просто мало того что винда так еще и 2003, еще бы виндовс xp поставил, если и работать то уже с 2012, но в любом случае это куча проблем и преимущества дебиана налицо)))

Конечно верно, у меня все сервера на debian \ centos.